1、Open https://hypermate.com on computer, click “Firmware Download”, to download the file to the local drive.
2、After decompressing the file, run the "Applet_Manager" executable file in the folder.
Mac:
At present, after the MAC firmware upgrade program is downloaded, the following error will be displayed when it is opened. This is because after the macOS security upgrade, programs from unknown sources are forcibly intercepted. If you have a Windows computer, you can just download the Windows version of the program and use it. But MAC users can use the following two methods to open the downloaded firmware update program.
Method 1: Set the General in Security and Privacy to "Any source" + close the sip. After performing these two operations, restart the computer to open the program you just downloaded. The tutorial is as follows:
https://www.insta360.com/cn/support/supportcourse?post_id=16882
https://zhuanlan.zhihu.com/p/338482020
Method 2: If you think the above operation is too complicated, and you happen to have other computers at home. You can download the firmware upgrade program on one computer and copy it to another mac computer through a mobile USB drive.
3、Follow the prompts to connect the computer and your HyperMate device with a data cable. Then you will see this interface if success.
4、Click "Firmware", check "Yes, I'm sure I have my mnemonic/recovery phrase on hand.", and then click “OK”.
5、At the same time, click the “OK” button on HyperMate device according to the prompts to confirm the update.
6、Your HyperMate wallet will enter the bootloader mode, then find and click “Start updating” on the computer to start the upgrade.
7、When the progress is one hundred percent completed, it will prompt "Your firmware is up to date", that is, the upgrade is formally completed.
